hyundai R510LC-7 — 2. MAIN CONTROL VALVE

Signal passage Oil from port PP flows into port PT via orifice(Lc3). At the same time, after passing through passage( (2) Neutral passage Oil from pump P1 goes through neutral passage(L1) to the orifice(Lc1) of the low pressure relief valve and then oil returns to port T1 and T3 via tank passage(Ta). Oil from pump P2 goes through neutral passage(R1) to the orifice(Rc1) of the low pressure relief valve and then oil returns to port T1 and T3 via tank passage(Ta). The pressure of upper chamber(L2), (R2) for the low pressure relief valve flow into pump through port ps1, ps2 and then controls the discharge of pump P1, P2.

When a large amount of oil flows the neutral passage, the low pressure relief valves is operated. As a result, the shock pressure of port ps1, ps2 is prevented. (1) , R4). Oil via orifice(Lc6) flows into the tank passage(Ta) from land(Lc7) and return to the tank passage(Ta) via travel spool land(Rc5) through the passage ) via land (Lc4), oil returns to the tank passage(Ta) via land(Rc3). Meanwhile, some of oil from port PP flows into port PA via orifice (Lc5) and return to the tank passage(Ta) from boom 1 spool land(Rc4) via passage(L4, . 2-27 45071MC02