hyundai R510LC-7 — 2. MAIN CONTROL VALVE

4) SERVICE SPOOL When the service spool is pushed to the left by the pilot pressure of port Pb4, the neutral passage(L1) is closed, the oil discharged from pump P1 flows into the port B4 via parallel passage(L3), the load check valve(S4-1) and passage(S4-2). At the same time, as the port pa10(see 2-25 page) is pressurizing and the bypass cut spool(R) is pushed, the oil discharged from pump P2 flows together into the port B7 via passage(11), poppet(S4-3). The oil returned from port A4 flows into the tank via the tank passage(Ta).

5) BUCKET SPOOL When the bucket spool is pushed to the left by the pilot pressure of port Pb8, the neutral passage(R1) is closed, the oil discharged from pump P2 flows into the port B8 via parallel passage(R3), the load check valve(S8-1) and passage(S8-2). At the same time, as the port pa11 is pressurizing and the bypass cut spool(R) is pushed, the oil discharged from pump P1 flows together the passage(S8-2) via passage(7), poppet(S8-3). The return oil from port A8 flows into the tank via the tank passage(Ta). 45071MC09 2-33