4) BRAKE SYSTEM (1) Control valve swing brake system This is the brake system to stop the swing motion of the excavator during operation. In this system, the hydraulic circuit is throttled by the swing control valve, and the resistance created by this throttling works as a brake force to slow down the swing motion.
Work Deceleration Stop A B A B A B MCV MCV MCV MCV A, B opened MCV A, B throttled MCV A, B closed R130SM05 45070SM05 9 Separate plate 10 Lining plate 12 Brake piston 14 Spring 25 Cylinder 26 Housing 2-55 (2) Mechanical swing parking brake system The mechanical swing parking brake system is installed to prevent the upper structure from swinging downhill because of its own weight when the excavator is parked on a slope since it completely eliminates the hydraulic drift of swing motion while the excavator is on a slop, work can be done more easily and safely. Brake assembly Circumferential rotation of separate plate(9) is constrained by the groove located at housing(26).
When housing is pressed down by brake spring(14) through lining plate(10), separate plate(9) and brake piston(12), friction force occurs there. Cylinder(25) is constrained by this friction force and brake acts, while brake releases when hydraulic force exceeds spring force.