honda — Engine Cover/Cover Lock

1. ENGINE COVER a. REMOVAL/INSTALLATION Remove the engine cover by pulling the cover lock lever toward you. b. DISASSEMBLY/ASSEMBLY [1] ENGINE COVER [2] ENGINE COVER SEAL ASSEMBLY: Install the engine cover seal in the direction shown. [2]-2 OUTSIDE [3] COVER LOCK LEVER c. HOOK BRACKET ASSEMBLY REMOVAL 1) Remove the 6 x 20 mm socket bolt and the 6 x 16 mm socket bolt, then remove the hook bracket assembly (Front side hook bracket only). [1] 6 x 20 mm SOCKET BOLT (2) [Rear L./R. sides only] (1) [Front side only] [2] HOOK BRACKET ASSEMBLY Remove the two 6 x 20 mm socket bolts and remove the hook bracket assembly (Rear L./R. side hook brackets only).

2) Remove the three 6.5 x 10 x 11.5 mm distance collars from the engine cover (Front side hook bracket only). Remove the four 6.5 x 10 x 11.5 mm distance collars from the engine cover (Rear L./R. side hook brackets only). [3] 6.5 x 10 x 11.5 mm DISTANCE COLLAR (4) [Rear L./R. sides only] (3) [Front side only] [4] 6 x 16 mm SOCKET BOLT [Front side only] 4-2 [2]-1 INSIDE