honda — Programmed Fuel Injection

BF135A•BF150A 8) Install the VTEC spool valve assembly (BF150A) or valve assembly (BF135A) and tighten the 6 x 55 mm flange bolts securely. Do not allow the gasket and filter to come out of position. [1] FILTER [2] GASKET [1] VTEC SPOOL VALVE ASSEMBLY (BF150A) or VALVE ASSEMBLY (BF135A) 6 x 55 (3) 9) Install the harness band clip bracket C and tighten the three 6 x 14 mm flange bolts securely. [1] HARNESS BAND CLIP BRACKET C 6 x 14 (3) 10) BF135A: Connect the A/F sensor connector and set the connector on the harness band clip bracket C. BF150A: Connect the A/F sensor and the VTEC solenoid valve connectors and set the connectors on the harness band clip bracket C.

11) Set the harness band clip on the harness band clip bracket C. [2] A/F SENSOR CONNECTOR [3] VTEC SOLENOID VALVE CONNECTOR (BF150A only) 5-157