1. SILENCER DUCT [2] SILENCER DUCT ASSEMBLY a. REMOVAL [3] 18.5 mm CLAMP 1) Remove the engine cover (P. 4-2). [1] BREATHER TUBE [4] PRESSURE REGULATOR CONTROL TUBE Release the pressure regulator control tube from the two 3.5 mm tube clips of the silencer duct assembly. Remove the harness band clip, that secures the main wire harness, from the silencer duct assembly. 2) Release the breather tube from the 18.5 mm clamp and the guide of the silencer duct assembly. [8] GUIDE [7] 3.5 mm TUBE CLIP (2) [5] MAIN WIRE HARNESS [6] HARNESS BAND CLIP 3) Remove the four 6 x 25 mm flange bolts and the four 6 mm washers, then remove the silencer duct assembly.
[1] 6 mm WASHER (4) 6 x 25 (4) [2] SILENCER DUCT ASSEMBLY 6-2