honda — Service Information

BF135A•BF150A • POWER TRIM/TILT ASSEMBLY DOES NOT HOLD Loose Tighten the manual valve securely. Leaking Replace the O-ring and oil seal of the leaking point. Leaking Replace the power trim/tilt assembly. Abnormal Replace the motor assembly or gear pump assembly. Low level Add the oil to the specified level (P. 15-47). Air in the system Bleed air from the system (P. 15-48). 2-41 Check the manual valve for tightness. Ti ght Check for oil leakage from the power trim/tilt assembly. Not le aking Check for oil leakage from the cylinder sur- face. Not le aking Check the hydraulic pressure (P. 15-50). Nor mal Check the oil level (P. 15-47). Nor mal Check for air in the system.

No air in t he system Replace the power trim/tilt assembly.