honda — Service Information

BF135A•BF150A 2-43 • POWER TRIM/TILT ASSEMBLY QUICK REFERENCE CHART Symptom Pressure check Check point (See page 2-44) Check/repair method Does not tilt up Does not tilt down Does not hold Lower chamber hydraulic pres- sure lower than spec. or pres- sure drops. Upper chamber hydraulic pres- sure lower than spec. or pres- sure drops. Lowers Extends — — Motor assembly Check the motor assembly. Manual valve Check that the manual valve is installed securely. Replace if it is damaged. Check the O-ring surface for damage and replace if necessary. If there is no damage, clean the O-ring and install on the manual valve properly.

— — Backup ring O-ring (Piston rod B) Check the backup ring for damage and replace if necessary. Check the O-ring surface for damage and replace if necessary. If the backup ring and O-ring are nor- mal, clean and install on the piston rod B properly. Backup ring O-ring (Free piston) Check the backup ring for damage and replace if necessary. Check the O-ring surface for damage and replace if necessary. If the backup ring and O-ring are nor- mal, clean and install on the free piston properly. — — — Check valve (Free piston) Check the ball seat and the neighboring area for damage and replace the free piston as an assembly if necessary.

(Do not disassemble the free piston.) — — — O-ring (Piston rod comp.) Check the O-ring surface for damage and replace if necessary. — — — Shock relief valve (Piston rod comp.) Check the ball seat and the neighboring area for damage and replace the piston rod comp. as an assembly if necessary. (Do not disassemble the piston rod comp.) — — — Dust seal, O-ring (Cylinder cap) Check the dust seal and O-ring for dam- age and foreign material (oil leakage). Replace if necessary. — — — — Oil (ATF) Check the oil level and add the oil if necessary. — — Pump assembly If the pump turns idle or excessively heavy, replace the pump assembly.

(Do not disassemble the pump assembly.) Up relief valve The valves are built in the pump assem- bly. Replace the pump assembly if nec- essary. (Do not disassemble the pump assembly.) — — — — Down relief valve — — Lower chamber check valve — — Lower chamber spool valve Upper chamber check valve — — Upper chamber spool valve