honda — Propellor/Gear Case/Extension Case/Oil Case

d. THRUST SHIM 1) Assemble the outer race and inner race of the 50 x 90 x 28 mm taper bearing, and turn the outer race two or three turns. [1] OUTER RACE 2) Measure the bearing height (distance F) from the outer race end to the inner race end as shown, and record the measurement. [2] INNER RACE 3) Measure the inner race height (distance K) as shown, and record the measurement. 4) Determine the calculation value using the bearing height (distance F), inner race height (distance K) and the following formula. Formula: Bearing height (distance F) – Inner race height (distance K) = Calculation value Example:

When, bearing height (distance F) is 28.05 mm (1.104 in), And, inner race height (distance K) is 28.00 mm (1.102 in): 28.05 – 28.00 = 0.05 Therefore, the calculation value is 0.05 mm (0.002 in). 5) Check the calculation value and the bearing height, and select the shim of the appropriate thickness from the shim selection table accordingly. Shim type table [1] 50 x 90 x 28 mm TAPER BEARING (INNER RACE) Thrust shim selection table [3] Unit: mm (in) Refer to page 14-80 for the information on how to read the shim selection table and shim combination.

14-83 [1] Shim type [2] Thickness [3] Thrust shim A 0.10 mm (0.004 in) [4] Thrust shim B 0.15 mm (0.006 in) [5] Thrust shim C 0.30 mm (0.012 in) [6] Thrust shim D 0.50 mm (0.020 in) [2] Calculation value +0.15 (+0.006) – +0.10 (+0.004) +0.10 (+0.004) – +0.05 (+0.002) +0.05 (+0.002) – ±0 (±0.000) [1] Bearing height 28.00 (1.102) – 28.05 (1.104) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 28.05 (1.104) – 28.10 (1.106) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028)