honda — Operation

4. AIR/FUEL RATIO O 2 FEEDBACK CONTROL BY A/F SENSOR Receiving the current value signal from the A/F (Air Fuel Ratio) sensor, the ECM controls the fuel injection duration (fuel amount) so that the engine’s suction air fuel mixture is at or near the target air/fuel ratio determined by the main CPU. ECM MAP SENSOR DECISION OF BASIC INJECTION AMOUNT DECISION OF TARGET A/F RATIO CKP SENSOR CMP SENSOR IAT SENSOR BASIC INJECTION AMOUNT ENVIRONMENT COPENSATION ECT SENSOR BARO SENSOR A/F SENSOR TARGET A/F RATIO COMPENSATION DECISION OF ACTUAL INJECTION AMOUNT INJECTOR A/F (AIR FUEL RATIO) SENSOR The A/F sensor, mounted on the exhaust manifold, detects the oxygen density in the exhaust gas.

The A/F sensor has the built-in zirconia element coated with the platinum on the inner and outer surfaces and wrapped with the coarse diffused resistance layer. The sensor is structured so that its inner surface is exposed to the atmosphere and the outer surface to the exhaust gas. When a given voltage is applied between the platinum electrodes, the current does not change by applying further voltage between the electrodes. However, the current value changes in accordance with the oxygen density in the exhaust gas that passed through the diffusion resistance layer.

Utilizing this characteristic, the A/F sensor detects the change in oxygen density in the exhaust gas linearly, and thereby it realized very precise control of the air/fuel ratio. EXHAUST GAS A/F SENSOR AIR FUEL RATIO/CURRENT CHARACTERISTIC CHART TIP OF THE SENSOR ZIRCONIA ELEMENT ATMOSPHERE i CERAMIC HEATER PLATINUM ELECTRODES (mA) A/F DIFFUSED RESISTANCE LAYER 19-4 0 5 0 10 15 20 5 0 –1 0 1 0