TUBE INSTALLATION: P. 2-59 [18] AIR VENT TUBE A [11] CHECK VALVE [15] AIR VENT TUBE B [14] T-JOINT [10] PRESSURE REGULATOR RETURN HOSE [17] HOSE CLAMP [12] AIR VENT TUBE C Set the air vent tube B in the clamp of the larger diameter side and the pressure regulator return hose in the smaller diameter side. [16] PIPE CLAMP [13] HOSE CLAMP Set the air vent tube A in the clamp of the larger diameter side and the pressure regulator return hose in the smaller diameter side. Set the air vent tube A in the clamp of the larger diameter side and the air vent tube D in the smaller diameter side.
2-71 [1] PRESSURE REGULATOR CONTROL TUBE Connect the pressure regulator control tube aligning the marked part on the tube with the end of the 3.5 [5] FUEL TUBE CLAMP mm tube clamp. Set the breather tube in the clamp of [1]-2 [1]-1 the larger diameter side and the 3.5 mm PRESSURE REGULATOR pressure regulator control tube in the TUBE CONTROL TUBE smaller diameter side. CLIP [2] BREATHER TUBE [6] TUBE CLAMP D25.0 INSTALLATION: P. 2-67 [3] [4] 3.5 mm TUBE 18.5 mm [7] WATER RELIEF CLIPS CLAMP TUBE A [1]-3 MARKING Connect the pressure regulato control tube aligning the marked par on the tube with the end of the 3.5 mm tube clamp.
[1]-2 [1]-1 3.5 m PRESSURE REGULATOR TUBE CONTROL TUBE CLIP [1]-3 MARKING INSTALLATION: P. 2-66 [4] 18.5 mm CLAMP [8] AIR VENT TUBE D PHRAGM E [9] TUBE CLAMP IAB CONTROL VALVE [20] DIA TUB