honda — Service Information

[4] HOSE CLAMP Set the air vent tube B in the clamp of the larger diameter side and the pressure regulator return hose in the smaller diameter side. [5] AIR VENT TUBE B [6] TUBE CLIP [3] VAPOR CHAMBER Clamp the air vent tube E and the fuel hose (high pressure side) as shown. [2] PRESSURE REGULATOR RETURN HOSE [7] FUEL HOSE (HIGH PRESSURE SIDE) [1] HOSE CLAMP INSTALLATION: P. 2-61 [13] 7 x 400 mm TUBE [11] TUBE CLAMP D10.7 [10] AIR VENT TUBE E [12] TUBE CLIP [8] TUBE CLAMP D32.5 Install with the lugs facing down. [12]-1 7 x 400 mm TUBE [9] OIL TUBE [12]-2 TUBE CLIP • Install the oil tube aligning the projection on the oil tube installation part with the projection of the oil tube.

• Install the tube clamp D32.5 with the lugs in the position shown. [9]-1 PROJECTION [9]-4 TUBE CLAMP D32.5 [12]-3 LUGS [9]-3 OIL TUBE [9]-2 LUGS 2-74 9]-1 ROJECTIO N