www.WorkshopManuals.co.uk Glazing The glass panes on the cab are all direct glazed. Direct Glazing The following procedures explain how to correctly remove and install panes of glass that are directly bonded to the cab frame apertures. When carrying out the procedures, relevant safety precautions must be taken: Removing the Broken Glass and Old Sealant Several special tools are required to successfully complete the removal and replacement procedures. Reference is made to the tools in the text. The majority of these tools can be obtained locally and the remainder from JCB Service (see Service Tools ). 1 Always wear safety glasses during both removal and replacement.
2 Use protective gloves - heavy duty leather gauntlet type gloves when cutting out the broken glass; 'non-slip' type gloves when handling/moving panes of glass; surgical type gloves when using the polyurethane adhesives. The work must only be carried out in a dry, frost free environment. A protective canopy may be required or the machine/frame must be moved to a sheltered area. In damp or wet conditions, hinged doors and window frames can be removed from the machine and taken to a more suitable (dry) environment. 3 Wear protective overalls. 4 DO NOT smoke - the activators and primers used in the procedures are highly flammable. Glass should not be replaced at temperatures below 5°C (41°F).
5 Do not attempt to handle or move panes of glass unless you are using glass lifters (see Service Tools ). Note: The front screen glass is laminated, the other glass is toughened. If a laminated pane breaks it will stay in one piece even though the glass is cracked. A toughened pane will shatter and fall apart. The method of removal of the glass depends upon which type it is. See WARNING below. ! WARNING Always wear safety glasses when removing or installing screen glass. Never use a power operated knife when removing the sealant around a toughened glass screen.
The action of the knife could cause particles of glass to be thrown with sufficient force to cause serious injury, even when safety glasses are being worn. Use only hand operated tools when working with toughened glass. BF 2-3/1 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 1 Section B Body & Framework Section B 21 - 1 21 - 1 Service Procedures