www.WorkshopManuals.co.uk Service Tools (cont'd) Section B - Body & Framework 240V Static Oven - available with 2 or 6 cartridge capacity - required to pre-heat adhesive prior to use. No plug supplied. Note: 110V models available upon request - contact JCB Technical Service. Glass Lifter - minimum 2 off - essential for glass installation, 2 required to handle large panes of glass. Ensure suction cups are protected from damage during storage. JCB part number: 992/12400 - 2 Cartridge x 240V 992/12600 - 6 Cartridge x 240V JCB part number - 892/00842 S186300 S186260 Wire Starter - used to access braided cutting wire (below) through original polyurethane seal.
Cut-Out Knife - used to remove broken glass. JCB part number - 992/12800 JCB part number - 892/00848 S186310 S186340 'L' Blades - 25 mm (1 in) cut - replacement blades for cut-out knife (above). JCB part number - 992/12801 (unit quantity = 5 off) Glass Extractor (Handles) - used with braided cutting wire (below) to cut out broken glass. JCB part number - 892/00846 S186320 S186350 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 1 Section 1 General Information Section 1 4 - 2 4 - 2