JCB — Front/Steering Console

www.WorkshopManuals.co.uk Removal and Replacement Front/Steering Console Removal 1 Park the machine on firm level ground, apply the parking brake. Lower the loader arms and excavator to the ground, switch OFF the engine and remove the starter key. 2 Disconnect the battery. 3 Working in the cab, remove the steering wheel as shown. C 4 Remove the fixings A (4 off) at positions shown and take off the steering column pedestal cover. B B 5 Remove the column switches B . 6 Remove the instrument panel C . A A 7 Remove the fixings D (4 off) securing the front console panel at positions shown and then carefully lift up the front console clear of the steering column assembly.

A Replacement A Replacement is the reverse of the removal sequence. Take care when removing/replacing the console panel to ensure that harnesses do not become snagged and that no other connections have been disturbed. After re-fitting, operate the front/steering console controls and check they all function correctly. D D D D A396920 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 1 Section B Body and Framework Section B 51 - 1 51 - 1 Cab Panels