www.WorkshopManuals.co.uk Powershift Gearbox - 4 Speed 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 2* Section F Transmission Section F 6 - 1 6 - 1 Technical Data Description Full electro-hydraulic transmission unit with input, reverse, layshaft, mainshaft and 4 wheel drive clutch packs giving 4 forward and 4 reverse speeds. Designation PS764 (4 wheel drive) Weight (dry) 2WD T.B.A. 4WD T.B.A. Gear Ratios 1st 7.97:1 2nd 4.29:1 3rd 1.86:1 4th 1.00:1 Torque Converter Torque Converter Dia.
310 mm (12.2 in.) Torque Converter Identification 04/600580 04/600581 Torque Multiplication at Stall 2.52:1 3.01:1 Converter Pressures (in neutral) bar kgf/cm2 lbf/in2 Converter In at 50 ºC 1000 rev/min 2.0 - 4.95 2.0 - 5.0 29 - 72 2000 rev/min 4.0 - 6.8 4.1 - 6.9 58 - 99 Converter Out at 50 ºC 1000 rev/min 0.6 - 2.25 0.6 - 2.3 8.7 - 33 2000 rev/min 1.25 - 2.50 1.3 - 2.6 18 - 36 Converter Inlet Relief Valve Pressure (max.) 7.1 7.2 103 Lubrication Pressures (in neutral) At 50 ºC 1000 rev/min 0.25 - 1.0 0.26 - 1.0 3.6 - 14.5 2000 rev/min 0.50 - 1.0 0.51 - 1.0 7.3 - 14.5 Main Line Pressure (in neutral) At 50 ºC 1000 rev/min 11.4 - 15.7 11.6 - 16.0 165 - 228 2000 rev/min 12.4 - 17.0 12.6 - 17.3 180 - 246 Flow Rates (in neutral) L/min US gal/min UK gal/min Cooler at 50 ºC 1000 rev/min 14.0 MIN 3.7 MIN 3.1 MIN 2000 rev/min 17.0 MIN 4.5 MIN 3.7 MIN Pump at 50 ºC 1000 rev/min 16.0 MIN 4.2 MIN 3.5 MIN 2000 rev/min 34.0 MIN 9.0 MIN 7.5 MIN Control Solenoid Valves 3 way, 2 position, normally closed, integral suppression diode.
Coil Resistance 7.5 Ohm @ 20 ºC *