JCB — User Guide

www.WorkshopManuals.co.uk Powershift Gearbox - 6 speed ShiftMaster Diagnostics - User Guide Step 4 : Start JCB Service Master . And go to the BHL section. Connection Problems : ShiftMaster Diagnostics will start and can be partly used even if there are connection problems. In general, whenever there are problems communicating with the DLA there will be an error message displayed. S404140 More specifically, if communications can not be established with the DLA then the ECU Setup Page will display 'NO DLA COMMS' where the ECU Part Number should be. S404210 Step 5 : Start the diagnostics tool running by clicking on the ShiftMaster Diagnostics icon.

S404150 S404220 If communications can not be established with the ECU then the ECU Setup Page will display 'NO ECU COMMS' where the ECU Part Number should be. Step 6 : The ShiftMaster Diagnostics tool will then open up displaying the main window as shown here. S404160 Note: The ECU must be powered for communications to work, i.e. the machine ignition must be ON (but the engine need not be running). For further details on possible communication problems please consult the Troubleshooting Guide included in the Help menu. S404230 Step 7 :

To start the ShiftMaster Diagnostics tool communicating with the ShiftMaster ECU either click on the Start button or select Start Diagnostics from the Options Menu. (See later sections for full details.) S404240 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 1 Section F Transmission Section F 69 - 3 69 - 3 Service Procedures