JCB — Changing the Differential Oil

www.WorkshopManuals.co.uk Checking the Differential Oil Level Changing the Differential Oil ! WARNING Make the machine safe before getting beneath it. Lower the attachments to the ground; engage the parking brake; remove the starter key, disconnect the battery. 2-3-2-2 ! WARNING Make the machine safe before getting beneath it. Lower the attachments to the ground; engage the parking brake; remove the starter key, disconnect the battery. 2-3-2-2 ! CAUTION The axle oil level must be checked with the machine level, otherwise a false indication of the amount of oil in the axle will be given. 16-3-5-3 1 Park the machine on level ground. Engage the parking brake. Set the transmission to neutral.

Lower the attachments to the ground. Stop the engine and remove the starter key. 2 Place a container of suitable size beneath plug B to catch the oil. Remove the drain plug B and its seal. Allow oil to drain out. The drain plug is magnetic. Wipe it clean. (Metallic particles should be carefully removed). Fit drain plug B and its washer. Tighten to 79 Nm (60 lbf ft). 1 Park the machine on level ground. Engage the parking brake. Set the transmission to neutral. Lower the attachments to the ground. Stop the engine and remove the starter key. 2 Clean the area around fill/level plug A , then remove the plug and its sealing washer. Oil should be level with the bottom of the hole.

Add recommended oil if necessary. 3 Fill with recommended oil through fill/level hole A . Clean and refit plug A and its seal. Tighten to 79 Nm (60 lbf ft). 3 Clean and refit the plug and its washer. FRONT REAR S260420 A A B B S260430 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 1 Section 3 Routine Maintenance Section 3 19 - 1 19 - 1 Front and Rear Axle (All Wheel Steer Machines)