Komatsu PC210-6K — 12.4 MOVING MACHINE OFF

12. OPERATION 4. @ Operate right and pedals © as follows. left travel levers © or right and left travel When the sprocket is at the rear of the machine Push levers © forward slowly or depress the front part of pedals @® slowly to move the machine off. Sprocket AN114030 @ When the sprocket is at the front of the machine Pull levers © backward slowly or depress the rear part of pedals @® slowly to move the machine off. REMARK Each time the travel levers are operated on machines equipped with the travel alarm, the alarm sounds to warn people in the machine vicinity.

Sprocket AN114040 12.4.2 MOVING MACHINE BACKWARD A WARNING e Before operating the travel levers, check the direction of the track frame. If the sprocket is at the front, the operation of the travel levers is reversed. e@ When moving off, check that the area around the machine is safe, and sound the horn before moving. e Clear all personnel from the machine e Clear al! obstacles from the path of the machine. e Use extreme care when and the area. reversing the machine. Note there is an blind spot behind the machine. e If the lever is moved speed 1. will suddenly inside the deceleration range, engine rise. Operate the levers carefully.

Set swing lock switch @ to the ON confirm that swing lock monitor lamp (actuated) position @ lights up. and AD324300 2-62