12. OPERATION 12.5 STEERING MACHINE 12.5.1 STEERING (CHANGING DIRECTION) A WARNING Before operating the travel levers, check the position sprocket. If the sprocket is at the front, the operation of the of the travel levers is reversed. Use the travel levers to change direction. Avoid sudden changes of direction as far as possible. In particular, when carrying out counter-rotation (spin turn), stop the machine first before turning. Operate two travel levers @ as follows. ©? \"AN114070 Changing direction of machine when stopped When turning to the left: Push the right travel lever forward to travel left when traveling forward; and pull it back to turn left when traveling in reverse.
= REMARK When turning to the right, operate the left travel lever Forward = left turn Reverse left turn i in the same way. AN114080 Steering when traveling (left and right travel levers both operated in same direction) When turning to the left: If the left travel lever is returned to the neutral position, the machine will turn to the left. Forward oF => left turn Reverse left turn = REMARK When turning to the right, operate the right travel lever in the same way. AN114090 2-64