12. OPERATION 12.12 PRECAUTIONS PRECAUTIONS WHEN FOR OPERATION INCORRECT TRAVELING When traveling over obstacles such as boulders or tree stumps, the machine (in particular, the undercarriage) is subjected to a large shock, so reduce the travel speed and travel over the obstacle at the center of the tracks. As far as possible, remove such obstacles or avoid traveling over them. AN114270 PRECAUTIONS AT Hi-SPEED TRAVEL On uneven roadbeds such as rock beds or uneven roads with large locks, travel at Mi or Lo speed. When Hi-speed traveling, set the idler in the forward direction.
AD324310 PERMISSIBLE WATER NOTICE DEPTH When driving the machine out of water, if the angle of the machine exceeds 15°, the rear of the upper structure will go under water, and water will be thrown up by the radiator fan. This may cause the fan to break. Be extremely careful when driving the machine Do not immerse the machine out of water. in water by more than the permis- sible depth (under center of carrier roller (4). In addition, for parts that have been immersed time, pump in grease until the old bearings. (Around the bucket pins) grease AN114280 in water for a long comes out from the AN114290 2-75