Komatsu PC210-6K — 13.1 LOADING,UNLOADING WORK

13. TRANSPORTATION 2. Set the travel speed switch to the Lo position. AD157790 3. Turn the auto-deceleration switch OFF, and trol dial to reduce the engine speed. return the fuel con- AD157780 4. 5. Turn the swing lock switch ON to apply the swing lock. Set in the direction of the ramps, lower the work equipment as far as possible without letting it hit the trailer, then travel slowly to load or unload the machine. When lever. 6. on the ramps, do not operate any lever other than the travel Load the trailer.

ON i S AM090290 machine correctly in the specified position on the REMARK When the work equipment is installed, load the machine from the front; when the work equipment is not installed, load the machine from the rear. 2-87