14. COLD WEATHER OPERATION 14.1 PRECAUTIONS FOR LOW TEMPERATURE if the temperature becomes low, it becomes difficult to start the engine, and the coolant may freeze, so do as follows. 14.1.1 FUEL AND LUBRICANTS Change to fuel and oil with low viscosity for all components. For details of the specified viscosity, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 14.1.2 COOLANT A WARNING Keep antifreeze fluid away when using antifreeze. from an open flame. Never smoke NOTICE @ Never use methanol, e Absolutely avoid using any water leak preventing agent irre- ethanol or propanol based antifreeze. e spective of whether it is used independently or mixed antifreeze.
Do not mix one antifreeze with a different brand. with an For details of the antifreeze mixture when changing the coolant, see “24.2 WHEN REQUIRED”. Use a Permanent Antifreeze (ethylene glycol mixed with corrosion inhibitor, antifoam agent, etc.) meeting the standard requirements as shown below. With permanent antifreeze, no change of coolant is required for a year. If it is doubtful that an available antifreeze meets the standard requirements, ask the supplier of that antifreeze for information.
Standard requirements for permanent antifreeze © @ SAE ec ececsseseenssenesssencsaeceusseeesnesaeeeneceseessecsesneesseessessauseeseeenss J1034 FEDERAL STANDARD ue ee eeeeceeeeeeeeeeesecteesneestens 0-A-548D REMARK Where no permanent antifreeze is available, an ethylene glycol antifreeze without corrosion inhibitor may be used only for the cold season. In this case, clean the cooling system twice a year (in spring and autumn). When refilling the cooling system, add antifreeze in autumn, but do not add any in spring. 2-90