17. GUIDES TO MAINTENANCE Do not carry out any inspection and maintenance Perform maintenance work on hard, flat ground. operation that is not given in this manual. Check service meter: Check the service meter reading every day to see if the time has come for any necessary maintenance to be carried out. Komatsu genuine replacement parts: Use Komatsu genuine parts specified Komatsu Use genuine Komatsu in the Parts Book as replacement parts. oils: genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. Always use clean washer fluid: Use automobile window washer fluid and be careful not to let any dirt get into it.
Always use clean oil and grease: Use clean oil and grease. Also, keep containers of the oil and grease clean. Keep foreign materials away from oil and grease. Keeping the machine clean: Always keep the machine clean. This makes is easier to find parts causing problems. Keep in particular grease fittings, breathers and oi! level gauges clean and avoid foreign matters from getting in them. engine stops Be careful of hot water and oil: Draining hot oils and coolants and removing hazardous. Allow the engine to cool. If the oil has to be drained when it is cold, warm their filters immediately after the are up the oil to a suitable temperature (approx. 20 — 40°C) before draining it.
Checking foreign materials in drained oil and on filter: After oil is changed or filters are replaced, check the oil and filters for metallic particles and foreign materials. If large quantities of metallic particles or foreign materials are found, consult your Komatsu distributor. Fuel strainer: lf your machine is equipped with a fuel strainer, do not remove it while fueling. Oil change: Check or change oils in the places where dust is scarce to keep foreign materials away from oils.