18. OUTLINES OF SERVICE Use Komatsu When genuine changing parts for replacement. or adding oil, do not use a different type of oil. Unless otherwise specified, the oil and coolant used at the time of shipment from the factory are as shown in the table below. Item Kind of fluid Engine oil pan SAE 15W-40 API classification CD Swing machinery case Final drive case SAE 30 API classification CD Damper case SAE Hydraulic tank 10W API classification CD ASTM Fuel tank D975 No. 2 (However, used ASTM D975 for the winter No.
1 is season (October to March) Radiator 18.1 Komatsu (AF-ACL) OUTLINE Super Coolant 41% added to water OF OIL, FUEL, COOLANT 18.1.1 OIL Oil is used in the engine and work equipment under extremely severe conditions (high temperature, high pressure), and it deteriorates with use. Always use oil that matches the grade and temperature for use given in the Operation and Maintenenance Manual. Even if the oil is not dirty, always replace the oil after the specified interval. Oil corresponds to blood in the human body, so always be careful when handling it to prevent any impurities (water, meta! particles, dirt, etc.) from getting in.
The majority of problems with machine are caused by the entry of such impurities. Take particular care not to let any impurities get in when storing or adding oil. Never mix oils of different grades or brands. Always add the specified Having too much amount of oil. oil or too little oil are both causes of problems. If the oil in the work equipment is not clear, there is probably water or air getting In such cases, please contact your Komatsu distributor. When We changing the oil, always recommend you to have machine. replace the related filters at the same an analysis made into the circuit. time.
of the oil periodically to check the condition For those who wish to use this service, please contact your Komatsu of the distributor. 3-5