Komatsu PC210-6K — 18.2 OUTLINE OF ELECTRIC SYSTEM

18. OUTLINES OF SERVICE 18. 2 OUTLINE OF ELECTRIC SYSTEM If the wiring gets wet or the insulation is damaged, in hazardous malfunction of the machine. the electric system leaks and this could result Services relating to the electric system are (1) check of fan blet tension, (2) check of damage or wear in the fan belt and (3) check of battery fluid fevel. Never remove or disassemble any electric components Never install any electric components Be careful to keep the electric system installed other than these specified free of water when in the machine. by Komatsu. washing the machine or when it rains.

Since the controller for the control system may cause malfunction due to external wave interference, before installing a radio receiver and a walkie-talkie or citizen band, consult your Komatsu distributor. When working on the seashore, carefully clean the electric system to prevent corrosion. When installing a car cooler or any other electrical equipment, connect it to an independent power source connector. The optional power source must never be connected to the fuse, starting switch, or battery relay.