24. SERVICE PROCEDURE 24.2.3 CHECK AND TIGHTEN TRACK SHOE BOLTS lf the machine is used with track shoe bolts G) loose, they will break, so tighten any loose bolts immediately. AN114580 Method for tightening 1 First tighten to a tightening torque of 490 + 50 Nm 360 + 36 Ibft) then check that the nut and shoe contact with the link contact surface. 2 After checking, tighten a further 120° + 10°. (50 + 5 kgm, are in close Order for tightening Tighten the bolts in the order shown in the diagram on the right. After tightening, check that the nut and shoe are in close contact with the link mating surface. AD053090 3-32