@ WARNING: Failure to follow these safety to a serious accident. precautions may lead 7. PRECAUTIONS DURING OPERATION 7.55 TOWING WHEN — TOWING Injury or death could result if a disabled machine is towed the selection of the wire rope, so always do as follows. incorrectly or if there is a mistake Do not tow in a different way from the method given in the section “16.2 METHOD MACHINE”. Always wear leather gloves when When carrying out the starting the operation. preparation handling wire for towing in OF TOWING rope.
with another worker, agree on signals before If the engine on the problem machine will not start or there is a failure in the brake system, please contact your Komatsu distributor for repairs. It is dangerous to tow a machine on a slope, so choose a place where there is a gradual slope. If there is no place with a gradual slope, carry out work to make the slope as small as possible. If a problem machine is towed by another machine, ALWAYS towing capacity for the weight of the problem machine. Do 7.6 not use a wire rope which has cut strands @), kinks ®, use a wire or reduced rope with a sufficient diameter ©.
LIFTING OPERATIONS PROHIBITIONS FOR LIFTING OPERATIONS Do not use the work equipment to carry out lifting operations. In particular, do not do the following. e@ Do not weld a hook to the bucket to lift a Joad. e Do e@ Do not fit a wire not wind rope to the bucket teeth to lift a load. a wire rope directly around the boom or arm to lift a load. 1-21