A WARNING: Failure to follow these safety precautions may lead to a serious accident. | LOCKING 8. PRECAUTIONS FOR MAINTENANCE INSPECTION COVERS When carrying out maintenance with the inspection cover open, lock it securely with a lock bar. lf maintenance is carried out with the inspection cover open and not locked in position, it may close suddenly if knocked or blown by the wind, and may cause injury to the operator. MAINTENANCE WITH ENGINE RUNNING To prevent injury, do not carry out maintenance with the engine running. If maintenance must be carried out with the engine running, carry out the operation with at least two workers and do as follows.
@ One worker must always sit in the operator’s seat and be ready to stop the engine All workers must maintain contact with the other workers. at any time. e@ When carrying out operations near rotating parts, there is danger of being caught in the parts, so be extremely careful. e When cleaning inside the radiator, set safety lock lever @) to the LOCK position to prevent the work equipment from moving. e@ Do not touch any control levers. If any control lever must be operated, always give a signal to the other workers to warn them to move to a safe place. e Never touch the fan blade or fan belt with any tool or any part of your body. There serious injury. Lock N G is danger of @ s Free ox!
y SS 4 \ Y SS A0055210 DO NOT DROP TOOLS OR PARTS | AB305768 INSIDE MACHINE e When opening the inspection window or tank oil filler to carry out inspection, be careful not to drop any nuts, bolts, or tools inside the machine. If such parts are dropped into the machine, it will cause breakage of the machine, mistaken operation, and other failures. If you drop any part into the machine, always be sure to remove it from the machine. —| carrying PRECAUTIONS out inspection, do not carry any unnecessary WHEN HAMMER USING When using a hammer, always wear safety glasses, safety helmet, and other protective clothing, and put a brass bar between the hammer and the part being hammered.
If hard metal parts such as pins, edges, teeth, or bearings are hit with a hammer, there is danger that broken pieces might fly into your eyes and cause injury. tools or parts in your pocket. rN wo \\ Ny e@ When AE305880 1-27