@ WARNING: 8. PRECAUTIONS FOR MAINTENANCE PRECAUTIONS WHEN HIGH TEMPERATURE For reasons of safety, always follow these safety precautions. CARRYING OUT MAINTENANCE AT Immediately after stopping operations, the engine coolant, oil at all parts, the exhaust manifold, and the muffler are at high temperature. In this condition, if the cap is removed, or the oil is drained, or the filters are replaced, this may result in burns or other injury. Wait for the temperature to go down, then carry out the inspection and maintenance in accordance with the procedures given in this manual. Cleaning inside of cooling system — See “24.2 WHEN REQUIRED”.
Checking coolant level, oil level in hydraulic tank — Checking lubricating oil level, adding Changing oil, replacing filters - oil ~ see “24.3 CHECK see “24.3-7 PERIODIC BEFORE STARTING”. MAINTENANCE”. see “24.5-10 PERIODIC MAINTENANCE”. shih tssss, A0055050 CHECKS AFTER INSPECTION AND MAINTENANCE Failure to carry out inspection and maintenance fully, or failure to check the function of various maintenance locations may cause unexpected problems and may even lead to personal injury or damage, so always do as follows. e@ Checks when engine is stopped * Have all the inspection and maintenance locations been checked? * Have all the inspection and maintenance items been carried out correctly?
¢ Have any tools or parts dropped inside the machine? It is particularly dangerous caught in the lever linkage. * if they get Has water and oil leakage been repaired? Have bolts been tightened? @ Checks when engine is running For details of checks when the engine is running, see “8.2 DURING MAINTENANCE, NANCE WITH ENGINE RUNNING”, and be extremely careful to ensure safety. e Do the inspection e Is there any system? WASTE and maintenance oil leakage when the locations work engine speed MAINTE- normally? is raised and load is applied to the hydraulic are living, always follow the MATERIALS To prevent pollution, particularly in places where people procedures given below.
e Never dump waste oil in a sewer system, rivers, etc. or animals e Always put oil drained from your machine in containers. Never INCORRECT drain oil directly onto the ground. e@ Obey appropriate harmful objects batteries. laws such and regulations as oil, fuel, coolant, when disposing of solvent, filters, and A0055220 1-30