Komatsu PC210-6K — 11.1 MACHINE MONITOR

11. EXPLANATION OF COMPONENTS 2. AUTO-DECELERATION SWITCH (Selection switch) This switch acts to activate the function that automatically ers the engine speed and control lever is at neutral. Lamp Lamp lights up: goes out: reduces Auto-deceleration Auto-deceleration fuel consumption when low- the is actuated. is canceled. Each time the switch is pressed, the auto-deceleration is actuated or canceled. 3. AD157780 TRAVEL SPEED SWITCH A WARNING If the Hi-Lo switch is operated when the machine is traveling, the machine may deviate even when traveling in a straight line. To prevent this, always stop the machine before operating the travel speed switch.

This is used to select the three travel speeds. Lo lights up: Low speed travel Mi lights up: Mid range speed travel Hi lights up: High speed travel When the engine is started, the travel speed is automatically set to Lo. When traveling in Hi or Mi, the travel speed is automatically switched to low speed travel (Lo) to match the travel surface on soft ground or when traveling uphill, so there is no need to operate this switch. The monitor indication keeps lamp Hi or Mi lighted. AD157790