11. EXPLANATION OF COMPONENTS FUEL CONTROL DIAL (WITH AUTO-DECELERATION ©O 2. MECHANISM) This adjusts the engine speed and output. Low idling (MIN): Turned fully to the left Full speed (MAX): Turned fully to the right AN113210 3. CIGARETTE LIGHTER This is used to light cigarettes. To use, push the lighter in. After a few seconds it will spring back. Pull out the lighter and light your cigarette. By removing the cigarette lighter, the socket is available as a power source for the yellow flashing lamp. Max. current is 3.5 A (85 W). AM089410 4.
SWING LOCK SWITCH A WARNING e@ When the machine is traveling under its own power, or when the swing is not being operated, always set the switch to the ON (ACTUATED) position. e Onaslope, the work equipment may swing to the down side even if the swing lock switch is located at the ON position. Be careful concerning this point. This switch swing. ON is used to lock the upper structure so that it cannot position (actuated): a The swing lock is always applied, and the upper structure will not swing even if the swing is operated. In this condition, the swing lock lamp lights up. OFF position (canceled):
The swing lock is applied only when all work equipment control levers are at neutral; when any work equipment control lever is operated, it is canceled. The swing lock is actuated approx. 4 seconds after all work equipment control lever is placed in neutral. WIPER SWITCH ©8090 This switch @O® AM089420 actuates the front window wiper. OFF: The wiper stops. ON: The wiper moves continuously. Window washer fluid is sprayed out: leased, it returns to @. ON: The wiper moves intermittently. Window washer fluid is sprayed out: leased, it returns to @. When the switch is re- When the switch is re- AM089430