Komatsu PC210-6K — 12.1 CHECK BEFORE STARTING ENGINE

12. OPERATION 12.1.2 CHECK BEFORE Always out the carry STARTING items in this section before starting the engine each day. CHECK COOLANT LEVEL, ADD WATER A WARNING Do not open the radiator cap unless necessary. When checking the coolant, always check the radiator reserve tank when the engine is cold. 1. Open the rear door on the left side of the machine and check that the cooling water level is between the FULL and LOW marks on radiator reserve tank (@) (shown in the diagram If the water level is low, add water through reserve tank @ to the FULL level. on the right). the water filler of Lo 2. After adding 3. 13770 water, tighten the cap securely.

If the reserve tank becomes empty, first inspect for water leaks and then fill the radiator and the reserve tank with water. _— FULL LOW AN113780 CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL 1. Open the engine hood. 2. Remove dipstick @ and wipe the oil off with a cloth. 3. Insert dipstick © fully in the oil filler pipe, then take it out again. AE313550 4. The oil level should be between the H and L marks on dipstick NOTICE AND 2-44 For details of the oil to use, see “20. USE OF FUEL, COOLANT LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. {x If the oil level is below the L mark, add engine oil through oil filler ®. AD052340