Cummins — 4021391

Maintenance Schedule B3.9, B4.5, and B5.9 Industria [...] Page 2-4 Section 2 - Maintenance Guidelines 1 The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle weight, and idle time. For engines whose aspiration is jacket water-cooled, turbocharged only , or natural, refer to Table 1 in the Oil Drain Intervals section. 2 The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle weight, and idle time. For engines whose aspiration is charge air cooled, refer to Table 2 in the Oil Drain Intervals section.

3 Antifreeze check interval is every oil change or 500 hours or 6 months, whichever occurs first. The operator must use a heavy-duty year-round antifreeze that meets the chemical composition of ASTM D6210. The antifreeze change interval is 2 years, 2000 hours, or whichever occurs first. Antifreeze is essential for freeze, overheat, and corrosion protection. 4 Follow the manufacturer's recommended maintenance procedures for the starter, alternator, generator, batteries, electrical components, charge air cooler, radiator, air compressor, air cleaner, refrigerant compressor, and fan clutch. 5 The cooling system requirement to Flush at this scheduled maintenance includes: Drain, Flush. and Fill.

Oil Drain Intervals Refer to Table 1 or Table 2 to determine the maximum recommended oil change and filter change intervals engine operating in hours or months, whichever comes first. Table 1: Jacket Water Cooled, Turbocharged Only, or Naturally Aspirated Engines Cummins® Engine Standard Classification American Petroleum Institute Classification International Classifications All Engine Ratings (CES) (API)