B3.9, B4.5, and B5.9 Industria [...] Lubricating Oil Recommendations and Specifications Section V - Maintenance Specifications Page V-11 2 Outside North America, where oil meeting CES-20071, CES-20076, or CES20077 might not be available, Cummins Inc. primary recommendation is for an oil meeting Global DHD-1, as jointly developed by EMA, ACEA, and JAMA. 3 Ultra-low sulfur diesel fuel is defined as diesel fuel not exceeding 0.0015 (15 ppm) mass percent sulfur content (ultra-low diesel fuel is also defined by ASTM S-15). A sulfated ash limit of 1.0 mass percent is suggested for optimum valve and piston deposit and oil consumption control.
For further details and discussion of engine lubricating oils for Cummins engines, refer to Cummins Engine Oil Recommendations, Bulletin 3810340. The API service symbols are shown in the accompanying illustration. The upper half of the symbols display the appropriate oil categories. The lower half can contain words to describe oil energy- conserving features. The center section identifies the SAE oil viscosity grade.