B3.9, B4.5, and B5.9 Industria [...] Coolant Recommendations and Specifications Section V - Maintenance Specifications Page V-15 Coolant Recommendations and Specifications Fully Formulated Coolant/Antifreeze Cummins Inc. recommends the use of fully formulated antifreeze/coolant meeting Cummins® Engineering Standard (C.E.S.) 14603. For further details and discussion of coolant for Cummins® engines, refer to Coolant Requirements and Maintenance, Bulletin 3666132. Cummins Inc. recommends using either a 50/50 mixture of good-quality water and fully formulated antifreeze, or fully formulated coolant when filling the cooling system. Good-quality water is important for cooling system performance.
Excessive levels of calcium and magnesium contribute to scaling problems, and excessive levels of chlorides and sulfates cause cooling system corrosion. Water Quality Calcium Magnesium (hardness) Maximum 170 ppm as (CaCO + MgCO3) 3 Chloride 40 ppm as (CI) Sulfur 100 ppm as (SO ) 4