QSB4.5 and QSB6.7 Maintenance Schedule Section 2 - Maintenance Guidelines Page 2-3 Coolant Level - Check Drive Belts - Check Maintenance Procedures at 500 Hours or 6 Months 1, 2, 3 Section 5 Engine Coolant - Antifreeze Check Fuel Filter (Spin-On Type) - Change Lubricating Oil and Filters - Change Radiator Pressure Cap - Check Maintenance Procedures at 1000 Hours or 1 Year 3 Cooling Fan Belt Tensioner - Check Fan Hub, Belt-Driven - Check Maintenance Procedures at 2000 Hours or 2 Years 2, 3 Cooling System - Flush 4 Air Compressor Discharge Line - Check Vibration Damper, Rubber - Check Vibration Damper, Viscous - Check Maintenance Procedures at 5000 Hours or 4 Years 3 Overhead Set - Adjust 1 The lubricating oil and lubricating oil filter interval is determined by the sulfur content of the fuel used, the lubricating oil type used, and the engine rating.
See the Oil Drain Intervals in this section.