Plug connections 1 MES O Activation for fuel-delivery actuator Output, fuel-delivery control circuit I max 11 A temporarily, on average 4.5 A, against batt.+, pulsed f=variable, pulse-width modulated 2 MES O Activation for fuel-delivery actuator Output, fuel-delivery control circuit 3 Not used 4 Not used 5 Not used 6 Not used 7 Not used 8 Not used 9 RWG M Control rod position transducer measuring coil (RWG 2) Control rod position evaluator circuit 10 RWG R Control rod position transducer reference coil (RWG O) Control rod position evaluator circuit 11 RWG Y Control rod position transducer centre pick-off (RWG 1) Control rod position evaluator circuit 12 Not used 13 GND-A Sensor ground 14 EAB 1 Electrical shut-down Output (switch) I max 1 A, U batt.
against batt. –, 15 Batt + Batt.+ via main relay Input battery + I with engine stationary 0.9 A, idle speed 1.5 A, operation 4.5 A, temporarily 16 A 16 Batt + Batt.+ via main relay Input battery + 17 NBF Sensor ground HZG Reference ground 18 Batt.– Battery negative Input battery – Same as batt.+ (EDC Pin 15 and 16) 19 Batt.– Battery negative Input battery – 20 DIA-B Diagnosis lamp Output (switch) I max 1 A, U batt. against batt. –, 21 DZG 1 RPM sensor signal Input, dynamic Alternating voltage U pp idle speed approx. 2 V, max. 80 V, f=6 x engine speed sec. 22 HZG 1 Auxiliary rpm sensor signal Input, dynamic Alternating voltage U pp idle speed approx. 2 V, max. 80 V, f=6 x engine speed sec.
29 Not used 30 Not used 31 Not used 32 Not used 33 LDF 2 Turbo pressure sensor (supply) Output, supply Controlled direct voltage, U approx. 5 V 34 KTF 1 Fuel temperature sensor Input, analog 35 MDB 1 Multi-stage input (torque limitation) Input, analog Circuit of various resistors for external faults (integrated in EDC operating element) 36 LDF 1 Boost pressure sensor signal Input, analog 37 Not used 38 Not used 39 LGS-E Idle speed switch signal (Pedal value transmitter) Input, static against GND-O (EDC-Pin 13) 23 Not used 24 Not used 25 Not used 26 Not used 27 PWG 1 Pedal position sensor signal Input, analog Direct voltage, U approx. 0.4 to 4 V 28 TDS-A Engine speed signal Output U batt.
against batt. –, square-wave signal, f=6 x engine speed sec. EDC Pin No. Abbreviation Description 57