MAN-Cats System Please note! An existing laptop should, as minimum, fulfil the following criteria for EDC: S 386er processor S 4 MB RAM memory S Serial port Operating the MAN-CATS software is only possible using MS-DOS 5.0 or higher. With regard to the future diagnostic system, a suitable laptop must be acquired at the ap- propriate time. Laptop with the following features Suitable for the proposed diagnostic system BE 3 for MAN marine engines: S Processor Intel Pentium 133 S Memory 32 MB RAM S Hard drive min. 1.0 G Byte S Disc drive S Lithium battery charger (without memory effect) S Media Slot:
Input alternatively for charger or CD ROM drive S Track ball or touch pad S Second serial port RS 232 for cable input (not infrared) S TFT Display (active matrix), resolution 800 x 600 (width x height), min. 256 color 68