Optional Equipment - Section 6 OM6008 Page 6-20 Payload Meter 3 Setting the Truck Type Setting the Truck Number Most mining operations assign a number to each piece of equipment for quick identification. This number or name can be entered in the Truck Number field. It is very important to enter a unique truck number for each truck using the PLM3 system. This number is one of the key fields used within the haul cycle database. The field will hold 20 alpha-numeric characters. 1. From the Truck Configuration screen, use the pull-down menu to select the truck type that the payload meter is installed on. 2. Press the "Save Changes" button to program the change into the meter. 1.
On the Truck Configuration screen, enter the truck number in the appropriate field. Setting the Gauge Display Units The Payload Meter Speedometer / Display Gauge displays the speed on the upper display. The units for the speed display are selected using a jumper on the rear of the case. 2. Press the "Save Changes" button to program the change into the payload meter. Setting the KMS Distributor This field in the haul cycle record can hold the name of the Komatsu Mining Systems distributor that helped install the system. KMS also assigns a distributor number to each distributor. This number is used on all warranty claims. This KMS distributor number can also be put into this field.
The field will hold 20 alpha-numeric characters. The payload units on the lower display can be changed from metric to short tons or long tons using the Truck Configuration screen. This selection also switches between metric (kg/cm 2 ) and psi (lbs/in 2 ) for the live display of pressure on the gauge. 1. From the Truck Configuration screen, select the payload units to be used on the lower display of the speedometer/display gauge. 1. On the Truck Configuration screen, enter the distributor name or number in the appropriate field. 2. Press the "Save Changes" button to program the change into the payload meter. 2. Press the "Save Changes" button to program the change into the payload meter.
Setting the Frame Serial Number Setting the KMS Customer This field in the haul cycle record can hold the name of the mine or operation where the truck is in service. KMS also assigns a customer number to each customer. This number is used on all warranty claims. This KMS customer number can also be put into this field. The field will hold 20 alpha-numeric characters. The frame serial number is located on the plate mounted to the truck frame. The plate is outboard on the lower right rail facing the right front tire. It is very important to enter the correct frame serial number. This number is one of the key fields used within the haul cycle database.
The field will hold 20 alpha- numeric characters. 1. On the Truck Configuration screen, enter the customer name or number in the appropriate field. 1. On the Truck Configuration screen, enter the truck frame serial number in the appropriate field. 2. Press the "Save Changes" button to program the change into the payload meter. 2. Press the "Save Changes" button to program the change into the payload meter.