Komatsu — HOIST CONTROL LEVER

Operation - Section 3 OM3029.2 9/01 Page 3-24 Operator Cab and Controls PSC DOWNLOAD PORT PAYLOAD METER This connector (13, Figure 3-4) is for use by qualified personnel to access diagnostic information for the Propulsion System Controller (PSC). The Payload Meter (1, Figure 3-5) and Download Con- nector (2) are used to provide management with op- erational data such as tonnage hauled and cycle times. Refer to Section 6, Optional Equipment, for a more complete description of the payload meter and its functions. ENGINE DIAGNOSTICS DOWNLOAD PORT This 3-PIN connector (14, Figure 3-4) is for use by qualified personnel to access the diagnostic informa- tion for the Engine Monitoring system.

(CENSE). Payload Meter Download Connector This connector (2, Figure 3-5) is used with a special cable to allow the Payload Meter (1) to communicate with a Portable Computer. TCI DOWNLOAD PORT This connector (15, Figure 3-4) is for use by qualified personnel to access the Truck Control Interface (TCI) diagnostic information and data. PASSENGER SEAT The Passenger Seat (16, Figure 3-4) is mounted on top of the right hand portion of the Center Console struc- ture. The area beneath the passenger seat provides a cabi- net for various 24 VDC electrical components. Consult the Shop Manual for service involving any of these components.

ENGINE CONTROL SYSTEM This 9-PIN connector (17, Figure 3-4) is for use by qualified personnel to access the diagnostic informa- tion for the Engine Control system. (QUANTUM) FIGURE 3-5. PAYLOAD METER 3 1. Payload Meter 3 2. Download Connector MODULAR MINING SYSTEM This connector (18, Figure 3-4) is for use by qualified personnel to access the Modular Mining System for diagnostic information and data.