BRAKES HG22 0 Service brake Foot operated, hydraulically actuated on four tandem wheels, 3,613㎠ total braking surface Parking brake Flexible shaft control, drum brake FRAME HG22 0 Height 302 mm Width 280 mm Side 22 mm Upper, Lower 25 mm DRAWBAR HG2 20 A-shaped, u-section press formed and welded construction for maximum strength with a replacable drawbar ball Drawbar frame 210*16 mm CIRCLE HG220 Four circle support shoes with replaceable wear surface. Circle teeth hardened on front 180°of circle Diameter (outside) 1,410 mm Circle reversing control hydraulic rotation 360 ° MOLDBOARD HG2 20 Replaceable metal wear inserts, cutting edge and bits. Cutting edge and end bits are hardened.
Dimensions 4,320*580*22 mm Arc radius 329 mm Cutting edge 152*16 mm BLADE RANGE HG220 Circle center shift Right 525 mm Left 530 mm Moldboard side shift Right 965 mm Left 965 mm Maximum shoulder reach outside rear tire (frame straight) Right 2,367 mm Left 2,372 mm Maximum lift above ground 450 mm Maximum cutting depth 535 mm Maximum blade angle, right or left 90 ° Blade tip angle 29-77 ° HYDRAULICS HG220 Hydraulic system of double pump and double multi way valve. Priority braking and steering.
There are hydraulic locks on the scraper lifting, front wheel tilting, traction frame tilting, power tilting, frame articulation and other oil circuits Output (at engine rated prm) 99 L/min Maximum system pressure 17.5 MPa