microsoft — HG220 SM

Unit: mm 20-76 Serial No.

Items to be inspected Requirement Remarks 1 Clearance between incline pin and incline rod sleeve Standard Value Tolerance Standard Clearance Allowable Clearance Reassemble Sleeve Axle Hole 50 -0.025 -0.064 +0.142 +0.080 0.125- 0.206 2.0 2 Clearance between main pin and sleeve 55 -0.030 -0.076 +0.174 +0.100 0.130- 0.250 2.0 3 Clearance between incline pin and sleeve 45 -0.025 -0.064 +0.142 +0.080 0.105- 0.206 2.0 4 Clearance between axle end pin and sleeve 45 -0.025 -0.064 +0.142 +0.080 0.105- 0.206 2.0 5 Clearance between ball joint and sleeve 55 0 -0.02 +0.02 0 0.02 -0.04 1.0 6 Clearance between support and sleeve Standard Clearance Clearance Limit 0.12~0.852 2.0 7 Preload of hub bearing Initial Rotation:

8-12 kg (at P point of hub bolt) Adjust