Komatsu — RELEASING PARKING BRAKE

OPERATION TOWING TOWING THE MACHINE This machine must not be towed except in emergencies. When towing the machine, take the following precautions. A WARNING! If there is a failure in the brake line, the brakes cannot be used, so be extremely careful when towing. WHEN ENGINE CAN BE USED l Always keep the engine running when towing the machine, so that the steering and braking can be used. WHEN ENGINE CANNOT BE USED l No lubrication oil flows in the transmission, so disconnect the front and rear drive shafts before moving the machine. l The steering cannot be used, so disconnect the steering cylinders and steering linkage.

* The machine should be towed only to the nearest place for inspection and maintenance. Do not tow the machine for long distances. * If leakage in the air circuit has caused the pressure inside the air tank to drop, the parking brake will be applied. When towing the machine, release the parking brake. RELEASING PARKING BRAKE 1. Remove air supply coupling (1) installed on the front left area of the rear frame. 2. Remove nipple (2) from the parking brake solenoid valve on the right side of the front frame and install the air supply coupling removed in Step 1. 3. Install the air charge hose for the tire to the air supply coupling. 2-66