MAINTENANCE INITIAL 250 HOURS SERVICE ONLY Perform the following maintenance only after the first 250 hours of service. TRANSMISSION OIL FILTER For details of the method of replacing or maintaining, see the section on “EVERY 500 HOURS SERVICE”. WHEN REQUIRED SUPPLEMENTAL COOLANT ADDITIVE CONCENTRATION - SCA Check and supply. For the detailed procedure, refer to the Engine Operation and Maintenance Manual. AIR CLEANER ELEMENTS CHECKING Whenever the yellow piston in service indicator appears in the transparent part of the indicator, clean or replace the air cleaner outer element. Stop the engine when cleaning the element.
After cleaning or replacing the element, push indicator reset button (2) to return the yellow piston to its original position. CLEANING OR REPLACING OUTER ELEMENT A WARNING! Do not clean or replace the air cleaner element with the engine running. 1. Open the air cleaner access door on the right side of the machine. 2. Loosen element wing nut (2) and remove the outer element (3). 3. Clean the inside of the air cleaner body. Ll2AVO12 4. Clean and inspect the element. Refer to “CLEANING OUTER ELEMENT” for cleaning procedure. 5. Install the cleaned and inspected element. 3-24