MAINTENANCE NORMAL ABNORMAL CONDITION Temperature of high & low pressure lines High pressure line is hot High pressure line is Almost no difference in Low pressure line is cold warm temperature between Clear difference in tem- Low pressure line is cold high & low pressure perature Little difference in tem- lines perature Sight glass Almost transparent. Any Bubbles are always flow- Misty substance is flow- bubbles disappear if en- ing. Sometimes becomes ing.
gine speed is raised or transparent or white bub- Iow- bles ered (z--J “Ear @ @ System line connections Properly connected Some parts dirty with oil Some parts very dirty with oil General condition of air conditioner Refrigerant level correct, May have refrigerant Almost all refrigerant has no abnomalities. Ready leak. Contact your dis- leaked out. Contact your for use. tributor for inspection and distributor for immediate repair. repair. ALTERNATOR DRIVE BELT Adjust or replace alternator drive belt. For the detailed procedure, refer to the Engine Operation and Maintenance Manual. FAN DRIVE BELT Adjust or replace fan drive belt.
For the detailed procedure, refer to the Engine Operation and Maintenance Manual. WATER PUMP DRIVE BELT Adjust or replace water pump drive belt. For the detailed procedure, refer to the Engine Operation and Maintenance Manual. ALTERNATOR Repair/replace. Contact your distributor for the detailed information. CRANKING MOTOR Under normal operating conditions, no maintenance is required between engine overhaul periods. At the time of engine overhaul, the motor should be disassembled, inspected, cleaned and tested. Contact your distributor for the detailed information. 3-37