Komatsu — Ground Driven Steering Operation Monitor - If Equipped

OPERATION 5. Engine Coolant Temperature Monitor This monitor indicates a rise in coolant temperature. When the monitor lamp flashes, run the engine with no load at midrange speed until the green range of the engine coolant temperature gauge lights. 6. Torque Converter Oil Temperature Monitor This monitor indicates a rise in torque converter oil temperature. When the monitor lamp flashes, stop the machine and run the engine with no load at midrange speed until the green range of the torque converter oil temperature gauge lights. 7.

Ground Driven Steering Operation Monitor - If Equipped If the engine stops while the machine is traveling or an abnormality occurs in the hydraulic steering circuit, the monitor lamp will light up and flash to show that the ground driven steering is in operation. A WARNING! If the monitor lamp flashes, move the machine immediately to a safe place and stop the machine. * Park the machine on level ground and check the monitor lamps. * Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your distributor to inspect that monitor lamp 2-9