OPERATION 5. WORKING LAMP SWITCH When the front and rear working lamps are turned ON, the pilot lamp and illumination lamp for the monitor panel will also light up. ON POSITION: Working lamps are ON. * When traveling on public roads, turn the working lamps OFF. OFF LllAMOl( 7. STARTING SWITCH OFF This switch is used to start or stop the engine. ON , OFF Key insertion-withdrawal position. No electrical circuits are activated. The hazard lamp and the parking lamp will remain on, however, when the switch is turned OFF. START To stop the engine, turn the switch to OFF. ON Charging and lamp circuits activate. Keep key at ON after starting.
START At this key position, the starting motor will crank the engine. Release the key immediately after starting, and the key will return automatically to ON. 8. LAMP SWITCHES For head lamps, turn signal lamps, dimmer switch Lamp switch Position 1 Parking lamps light up. Position 2 OFF Lamps go off. Position 3 Clearance lamps, tail lamps and machine monitor panel lighting light up. Position 4 Head lamps light up in addition to the lamps in position 3. Ll 1 AM01 * The lamp switch can be operated regardless of the position of the lever. 2-l 8