Komatsu — STEERING MACHINE

OPERATION SHIFTING BETWEEN FORWARD AND REVERSE There is no need to stop the machine even when shifting between FORWARD and REVERSE. Place directional lever (1) in the desired position. A A WARNING! Before changing direction, check that it is safe. WARNING! Never change between FOR- WARD and REVERSE at high speed. L07CHOi 2 STEERING IACHINE When traveling, use steering wheel (1) to turn the machine. * With this machine, the front frame is joined to the rear frame at the center of the machine by the center pin. The front and rear frames move at this point, and the rear wheels follow in the same track as the front wheels when turning.

* Turn the steering wheel lightly to follow the machine as it turns. When turning the steering wheel fully, do not turn it beyond the end of the stroke. A WARNING! It is dangerous to turn the ma- chine suddenly at high speed, or to turn on steep hills. WARNING! If the engine stops when the machine is traveling, the steering cannot be used. This is particularly dangerous on hills, so never stop the engine when the machine is traveling. A WARNING! If the engine should stop, stop the machine immediately in a safe place. A Z-50