OPERATION 4. Operate work equipment levers (5) to lower the bucket to the ground, move work equipment control levers (5) to their HOLD position and then move the control lever lock to the LOCK position. A WARNING! Stop the machine in a safe place on firm level ground. If the machine has to be stopped on a slope, put blocks under the wheels. In addition, dig the bucket into the ground to increase safety. OPERATIONAL PRECAUTIONS PERMISSIBLE WATER DEPTH When working in water or on swampy ground, do not let the water come above the bottom of the axle housing. Axle housing * After finishing the operation, wash and check the lubricating points.
IF WHEEL BRAKES DO NOT WORK If the machine is not stopped by depressing brake pedal(s), use the parking brake to stop the machine. WHEN TRAVELING UP OR DOWN SLOPES Lower Center of Gravity When Turning When turning on slopes, lower the work equipment to lower the center of gravity before turning. It is dangerous to turn the machine with the work equipment raised. Braking on Downhill Slopes When driving down a slope, place the transmission speed control lever in a low speed range position to make full use of the engine braking force. When applying the service brakes, depress the right brake pedal.
If the service brakes are used too frequently when traveling downhill, the brakes may overheat and damage may result. If the speed control lever is not placed in a proper speed position, the torque converter oil may overheat. If it overheats, place the speed control lever in the next lower gear speed to lower the oil temperature. 2-52